This article provides a step-by-step guide for replacing the batteries in a 2GIG wireless smoke detector.

If you have a 2GIG wireless smoke detector, you may need to replace the batteries from time to time. In this article, we will guide you through the process of replacing the batteries in your smoke detector.

  1. Contact the Help Desk Before you start the battery replacement process, it is important to call the help desk. This will ensure that the system is put on test mode, which will prevent any false alarms from happening during the process.
  2. Remove the Smoke Detector To remove the smoke detector, simply twist it. You will then see the batteries, which are located right there. Be careful not to push the button as this will cause the smoke detector to beep.
  3. Replace the Batteries The batteries required for the 2GIG wireless smoke detector are CR 12 three batteries. You will need two of them. Get your new batteries and insert them into the smoke detector, making sure to put the positive end where the positive marking is.
  4. Reinstall the Smoke Detector To reinstall the smoke detector, take a look at the hole and line it up with the little plastic piece. Then, simply twist the smoke detector back into place.

In conclusion, replacing the batteries in your 2GIG wireless smoke detector is a simple and straightforward process. Just follow these steps and you will have your smoke detector up and running in no time. If you have any questions or need further assistance, please don't hesitate to contact the help desk.