Panels: XR150/350, XT30/50 Keypads: 7872, 7873, 9862

Arm: On the main screen, press the center of the shield icon and release. Select the desired Arming Option (Home, Sleep, Away) by pressing unil it glows.

Disarm: Enter code to disarm the system.

Bypass Zone(s): If a problem exists on any zones, the zone name and problem are shown followed by: OK BYPASS STOP. Press BYPASS to bypass the zone(s) before arming.

Smoke Reset: When your system had a previous fire alarm, this option is used to reset the smoke detector sensors. Pressing RESET until it glows resets the sensors. SENSORS OFF displays in the upper right corner followed by SENSORS ON when RESET is successful.

Chime Mode On/Off: Press CHIME until it glows. This activates MONITOR. The System Status displays MONITOR ON in the upper right corner and a blue door icon displays in the System Status display. This initiates the Zone Monitor operation for all Exit zones in an Area system or all zones assigned to the perimeter in a Home/Sleep/ Away or All/Perimeter system. To deactivate, press CHIME again until it glows.

Change Code: Please contact Eagle Security at (530) 345-6395 for code changes.

User Manual: DMP Touchscreen User Manual